Posted Date : May 21,2021
Product (RFP/RFQ/RFI/Solicitation/Tender/Bid Etc.) ID : MRB-20589
Government Authority located in Nevada; USA based organization looking for expert vendor for aerial photos and aerial LiDAR Services.
[A] Budget: Looking for Proposals
[B] Scope of Service:
(1) Vendor needs to provide aerial photos and aerial LiDAR Services
- Aerial Survey Camera: The vendor shall use only large format digital aerial survey cameras vertically mounted in the aircraft to permit an unobstructed view in a mount designed to isolate the camera from aircraft vibration. The camera's angular vibration shall be reduced to such a level to have no significant detrimental effect on resolution,
- Camera Calibration: The camera must be calibrated, tested, and certified by the camera manufacturer or by a calibration center, recognized internationally, or approved by the camera manufacturer,
- Airborne Global Positioning System: The ABGPS receiver shall be required to be dual-frequency, GNSS enabled, and capable of tracking both coarse acquisition (C/A) and pseudo-range satellite signal data. Satellite lock must be maintained throughout the flight. Ground base stations and aircraft receivers must be using the same satellite configuration,
- Photographic Requirements:
- Aerial camera and aircraft shall have the ability to obtain Imagery at a ground sample distance (GSD) of four (4) cm per pixel or larger,
- Digital Image Files: The project images shall be provided as tiff tiled jpeg, compressed to approx. 120MB. The files shall be delivered to the DEPARTMENT by digital download, thumb drive, or portable hard drive,
- Aerial LiDAR System: The LiDAR system shall be a full waveform LiDAR system operating above 200 kHz capable of collecting at least four (4) coordinate points from each laser pulse using 'multiple return' methods. Where the topography is such that multiple returns are derived from a laser pulse, the last return must be one of the recorded points.
(2) All the questions must be submitted no later than May 26, 2021.
[C] Eligibility:
- Onshore (USA Organization Only);
[D] Work Performance:
Performance of the work will be Offsite. Vendor needs to carry work in their office location.
Budget :
Deadline to Submit Proposals: June 14,2021
Cost to Download This RFP/RFQ/RFI/Solicitation/Tender/Bid Document : 5 US$
![]()
Product (RFP/RFQ/RFI/Solicitation/Tender/Bid Etc.) ID : MRB-20589
Government Authority located in Nevada; USA based organization looking for expert vendor for aerial photos and aerial LiDAR Services.
[A] Budget: Looking for Proposals
[B] Scope of Service:
(1) Vendor needs to provide aerial photos and aerial LiDAR Services
- Aerial Survey Camera: The vendor shall use only large format digital aerial survey cameras vertically mounted in the aircraft to permit an unobstructed view in a mount designed to isolate the camera from aircraft vibration. The camera's angular vibration shall be reduced to such a level to have no significant detrimental effect on resolution,
- Camera Calibration: The camera must be calibrated, tested, and certified by the camera manufacturer or by a calibration center, recognized internationally, or approved by the camera manufacturer,
- Airborne Global Positioning System: The ABGPS receiver shall be required to be dual-frequency, GNSS enabled, and capable of tracking both coarse acquisition (C/A) and pseudo-range satellite signal data. Satellite lock must be maintained throughout the flight. Ground base stations and aircraft receivers must be using the same satellite configuration,
- Photographic Requirements:
- Aerial camera and aircraft shall have the ability to obtain Imagery at a ground sample distance (GSD) of four (4) cm per pixel or larger,
- Digital Image Files: The project images shall be provided as tiff tiled jpeg, compressed to approx. 120MB. The files shall be delivered to the DEPARTMENT by digital download, thumb drive, or portable hard drive,
- Aerial LiDAR System: The LiDAR system shall be a full waveform LiDAR system operating above 200 kHz capable of collecting at least four (4) coordinate points from each laser pulse using 'multiple return' methods. Where the topography is such that multiple returns are derived from a laser pulse, the last return must be one of the recorded points.
(2) All the questions must be submitted no later than May 26, 2021.
[C] Eligibility:
- Onshore (USA Organization Only);
[D] Work Performance:
Performance of the work will be Offsite. Vendor needs to carry work in their office location.
Budget :
Deadline to Submit Proposals: June 14,2021
Cost to Download This RFP/RFQ/RFI/Solicitation/Tender/Bid Document : 5 US$